Replace your hood's prop rod today with this Redline Tuning Hood QuickLIFT system. Progressive gas springs will lift and hold your hood without the need for a poorly placed prop-rod, simply start to lift your hood and let the QuickLIFT system take over. This V2 system is now entirely bolt-in and will take only a five minutes to install using only a 10mm socket. You'll use existing mounting locations on the vehicle with improved geometry for the QuickLIFT system's lifting action. This allowed the system to drop the gas spring force in half, reducing stress on the hood and mounting locations.
These Systems include Quick-release end-fittings on the gas struts for the Jeep models. This allows the user to easily remove the strut from the lower attachment and then place the hood all the way back onto the wind-shield.
The Jeep Wrangler hood QuickLIFT PLUS system is designed to fit Jeep JK models: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017. This system is the PLUS system which includes all-black mounting hardware and black e-coated gas springs with progressive slow-release.
This system has been tested to work with Genesis dual battery setup.
This system will NOT work with the AEV Hoods (please search 21-20005 for AEV specific Hood QuickLIFT System).
Prop rod can be removed once installed
Patent Pending Attachment System
Progressive, slow release gas springs - final few inches of operation, gas springs slow down extending rate allowing for a fluid lifting process.
Silver zinc-plated hardware in base QuickLIFT system
Black powder coated hardware in QuickLIFT PLUS and ELITE
316L Stainless steel gas springs in QuickLIFT ELITE
Full color installation manual with every QuickLIFT system
CAD designed hardware unique to each QuickLIFT application
These Systems include Quick-release end-fittings on the gas struts for the Jeep models. This allows the user to easily remove the strut from the lower attachment and then place the hood all the way back onto the wind-shield.
- NO MODIFICATIONS TO JEEP
- 5 MINUTE INSTALLATION - Very simple & quick installation
- USES EXISTING MOUNTING LOCATIONS
- TOOLS - 10mm socket and wrench, that's it!
- QUICK-RELEASE - Rod ends have quick-release feature so that you can remove and lay the hood all the back against the windshield.
- LIFTS & HOLDS HOOD without prop rod - just start to lift and let our Hood QuickLIFT System lift and hold up your hood.
The Jeep Wrangler hood QuickLIFT PLUS system is designed to fit Jeep JK models: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017. This system is the PLUS system which includes all-black mounting hardware and black e-coated gas springs with progressive slow-release.
This system has been tested to work with Genesis dual battery setup.
This system will NOT work with the AEV Hoods (please search 21-20005 for AEV specific Hood QuickLIFT System).
Prop rod can be removed once installed
Patent Pending Attachment System
Progressive, slow release gas springs - final few inches of operation, gas springs slow down extending rate allowing for a fluid lifting process.
Silver zinc-plated hardware in base QuickLIFT system
Black powder coated hardware in QuickLIFT PLUS and ELITE
316L Stainless steel gas springs in QuickLIFT ELITE
Full color installation manual with every QuickLIFT system
CAD designed hardware unique to each QuickLIFT application
