Includes Quick-release end-fittings on the gas struts. This allows the user to easily remove the strut from the lower attachment and then place the hood all the way back onto the wind-shield.
- NO MODIFICATIONS TO JEEP
- 5 MINUTE INSTALLATION - Very simple & quick installation
- USES EXISTING MOUNTING LOCATIONS
- TOOLS - 10mm socket and wrench, that's it!
- QUICK-RELEASE - Rod ends have quick-release feature so that you can remove and lay the hood all the back against the windshield.
- LIFTS & HOLDS HOOD without prop rod - just start to lift and let our Hood QuickLIFT System lift and hold up your hood
FITMENT: Our Jeep Wrangler & Gladiator Hood QuickLIFT ELITE System is designed to fit 2018+ Jeep Wrangler & 2020+ Gladiator JT Mojave & ALL OEM Hoods outside North America: 2018 2019 2020 2021 2022+.
If you have the Wrangler or Gladiator for United States market that is NOT a Mojave Edition, you need a lower force gas springs for the lighter steel hoods put on by Jeep. Purchase the 21-20003-03 system that we have created specifically for those vehicles. Mojave Edition and all Wrangle/Gladiators shipped outside the US have heavier steel hoods.
 |  |  | ||||
| Slip blind-insert into slot & align the bracket vertically until you can install lower bracket bolt. | Tuck NVH felt liner behind bracket, then tighten down bolts | Bracket uses existing 10mm bolt, rests on the fender lip for secure support of gas strut. |
Prop rod can be removed once installed
Patent Pending Attachment System
Progressive, slow release gas springs - final few inches of operation, gas springs slow down extending rate allowing for a fluid lifting process.
Silver zinc-plated hardware in base QuickLIFT system
Black powder coated hardware in QuickLIFT PLUS and ELITE
316L Stainless steel gas springs in QuickLIFT ELITE
Full color installation manual with every QuickLIFT system
CAD designed hardware unique to each QuickLIFT application
